Sunday, November 19, 2017

Wing: stall warning switch installation

They have you create the switch assembly, them attach it to a rib.  Then put the skin on (temporarily), so that you can adjust the vane of the switch.


Afterwards, when I put the bottom skins on for real, the switch still worked exactly as it did in this video.




at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Wings: Left bottom skin (all of them)

It so purdy!  This actually wasn't as much work as I thought it would be.  the bottom skin went on quickly.  I used the method of se...

  • Wings: Left bottom skin (all of them)
    It so purdy!  This actually wasn't as much work as I thought it would be.  the bottom skin went on quickly.  I used the method of se...
  • Wing: stall warning switch installation
    They have you create the switch assembly, them attach it to a rib.  Then put the skin on (temporarily), so that you can adjust the vane of ...
  • Wings: ribs
    Ribs ribs ribs. Fluted all of them.. tried to do many gentle flutes in the center of the ribs,  rather than just a couple big flutes. E...