Sunday, October 15, 2017

Attaching the Horizontal Stabilator

Hello from the future.  Here is a back-dated photo of the HS being attached.



NOTE:  This will need to come back off -- there is a service bulletin on it concerning reinforcing the forward side of the HS spar.  Apparently there was a plane that had some cracking in that area.

at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Wings: Left bottom skin (all of them)

It so purdy!  This actually wasn't as much work as I thought it would be.  the bottom skin went on quickly.  I used the method of se...

  • Wing: Left wing skeleton complete
    Note that the grommet on the inboard-most rib was initially put in backwards.  It was obvious later when I did the wiring. I did end u...